Energy Capacity: 20kWh
Max Output Power: 24kW
Max Recommended Inverter Power: 15kVA
Total Energy Capacity [kWh]
Energy, 80% DoD [kWh] 1
Energy, 90% DoD [kWh]
Current Capacity [Ah]
Max & Cont. Charge Current [A] 2
Max & Cont. Charge Power [kW] 2
Max/Cont. Discharge Current [A] 2
Max/Cont. Discharge Power [kW] 2
Max Recommended Inverter Total Rated Power (cont.) [kVA]
Nominal Voltage [V]
52V, to suit 48V Inverters, min 47V, max 56V
Dimensions on or against wall excluding protuberances such as glands and breaker handle -Height x Width x Depth [mm]
Aluminium — powder coated white front, rated for indoor use
DC Connection – Integrated Cables [no. per electrode] 3
2 x 50mm2
RJ45 Socket x 2 – CAN Bus for Interfacing with Compatible Inverters and System Controllers, and communication for the connection of parallel batteries – note that parallel batteries must all be of the same model.
Shunt Trip Circuit Breaker sized to suit max current, can be tripped by BMS if critical fault, manual reset. Includes overcurrent, cell under and over voltage, temperature, weak cell detection, minimum SOC control.
State of Charge Display (0 to 100%), Error light, Error Reset Button, USB Plug for Programming, Wifi remote monitoring (optional accessory).
10 years or 4 000 cycles for average 80% DoD, and max 90% DoD
Service Life 4
>16 years (>5 500 cycles) expected life at 80% DoD 1, >20 years (>7 500 cycles) at 50% DoD
Note that for connecting the battery to a PC a USB “printer” cable is required (one is supplied with each battery) CAN Bus Termination Resistor – one required per battery (one included with battery) CAN Bus Cable (RJ45 LAN Cable)-one required per battery (not supplied with battery). Note some inverters will require a special (non-standard pin configuration) cable – see installation manual.